sp7

FW Series Hydraulic Clamping System

    Contact

    The FW series hydraulic clamping system is used for mold clamping operations with the clamping direction from left to right, assisting the operator to make quick changes during mold production. This significantly shortens the time required to change molds and makes it an essential equipment to improve the efficiency of injection molding and die casting mold production.

      Technical specifications
      FW2
      • Clamping force (25MP): 20 kn
      • X-cycle: 7 mm
      • Y-clamp cycle: 3 mm
      • Z-safe cycle: 4 mm

      FW4
      • Clamping force (25MP): 40 kn
      • X-stroke: 7 mm
      • Y-stroke: 3 mm
      • Z-safety stroke: 4 mm

      FW6
      • Clamping force (25MP): 60 kn
      • X-stroke: 8 mm
      • Y-stroke: 4 mm
      • Z-safety stroke: 4 mm

      FW10
      • Clamping force (25MP): 100 kn
      • X-cycle: 8 mm
      • Y-clamp cycle: 3 mm
      • Z-safety cycle: 5 mm

      FW16
      • Clamping force (25MP): 160 kn
      • X-cycle: 8 mm
      • Y-clamp cycle: 3 mm
      • Cycle Z safety: 5 mm

      FW25
      • Clamp force (25MP): 250 kn
      • X-cycle: 8 mm
      • Y-cycle: 3 mm
      • Z-safe cycle: 5 mm

      FW50
      • Clamp force (25MP): 500 kn
      • X-stroke: 8 mm
      • Y-stroke: 3 mm
      • Z-safe stroke: 5 mm

      Machine series specifications

      Series Clamping force(25MP) X-stroke Y-stroke Z-safe stroke Hydraulic clamp cylinder mass Weight
      KN mm mm mm cm3 kg
      FW2 20 7 3 4 6.5 2
      FW4 40 7 3 4 13 4.8
      FW6 60 8 4 4 21 7.2
      FW10 100 8 3 5 33 13
      FW16 160 8 3 5 50 23
      FW25 250 8 3 5 88 36
      FW50 500 8 3 5 173 80

      Product selection
      Customers can choose the product line and the corresponding number of clamps depending on their usage needs.

      Machine capacity Technical parameters of the hydraulic clamping system force Thickness of the mold plate(mm)
      Fixed roller Quantity Moving roller Quantity
      60-120 FW2 4 FW2 4 25
      160-250 FW4 4 FW4 4 30
      280-320 FW6 4 FW6 4 30
      350-600 FW10 4 FW10 4 40
      650-850 FW16 4 FW16 4 50
      900-1300 FW16 6 FW16 6 50
      1400-1600 FW25 6 FW25 6 50
      1800-2800 FW25 8 FW25 8 50
      Features
      • The electrical system controller is equipped with an OMRON programmable controller, providing a user-friendly interface with multiple layers of protection for absolute safety performance.
      • With high precision and safety, our hydraulic clamping system ensures optimal performance and is very easy to use.
      • The clamps are arranged diagonally on the mold plate, so there are 4 independent oil lines on a pair of mold plates. If one oil line leaks, the other oil lines will not be affected.
      • The pumps and valves use leak-free closed technology, thus ensuring a maximum of 168 hours of leak-free performance under 25MP system pressure.
      • The power source of the pumping station is a pneumatic booster pump from Japan’s KOSMEK company, and it has a dual-pump design to improve both stability and safety during operation.
      • The system pressure will be detected by 4 sets of pressure switches from the US company GEMS. The pressure pump unit will provide additional pressure when the system pressure is lower than the setting, ensuring that the system pressure is controlled within the normal range.
      • This FW series hydraulic clamping system is equipped with OMRON PLC controller and SMC electrical devices, thus ensuring longer service life and better quality.  
      • The hydraulic clamping system and the injection molding machine have a safety interlock function, ensuring a high level of safety during use.
      FW Series Hydraulic Clamping System

      FW Series Hydraulic Clamping System

      Dimensions
      Specifications G E F S P Q Rc M N L K J H(Standard)
      FW2 60 58 28 58 6.7 12.5 1/4 48 24 100 18 82 25
      FW4 66 73 40 80 8.6 16 1/4 70 35 138 23 115 30
      FW6 80 94 50 87 8.3 20 1/4 76 45 160 30 130 30
      FW10 90 106 55 107 11.1 20 1/4 95 55 194 30 164 40
      FW16 100 126 60 135 8.6 20 1/4 120 75 230 30 200 50
      FW25 113 155 73 150 10.5 20 1/4 135 90 270 30 240 50
      FW50 155 230 110 178 10.5 20 1/4 160 90 320 30 290 60

      FW Series Hydraulic Clamp System

      Note: H is the thickness of the mold base plate paired with the standard hydraulic clamp and can be customized upon request.

      Reviews

      There are no reviews yet.

      Be the first to review “FW Series Hydraulic Clamping System”

      0903-42-9994