2 tam

High Precision Spotting Press with Two Plate Clamping

    Contact

    The high-precision mold detection machine with double-plate clamping is designed and developed based on the JM mold detection machine.

    Through the use of four oil cylinders placed in a balanced position, it helps to complete the mold detection well. But there is no seat on the top of the machine, so the height of the machine is reduced by 15-25% compared with the JM series mold detection machine. It is an ideal equipment for factories with limited height.

    Equipped with a locking device to ensure safety during operation, so that even if there is a power failure or machine failure during operation, the brake device will hold the mold plate and prevent it from continuing to move.

      Choose model

      With different pressures, we provide 4 types of machines from 160T to 600T, including equipment with a minimum mold size of only 22 tons, a height of 4m and a machine table length of 1.6m, thus increasing the utilization rate in small spaces.

      SX160YC-II
      • Pressing capacity: 160 tons
      • Mold opening capacity: 38 tons
      • Turning capacity: 8 tons
      • Push capacity: 6.3 tons

      SX300YC-II
      • Pressing capacity: 300 tons
      • Mold opening capacity: 56 tons
      • Turning capacity: 18 tons
      • Capacity Pushing capacity: 6.3 tons

      SX400YC-II
      • Pressing capacity: 400 tons
      • Mold opening capacity: 80 tons
      • Turning capacity: 25 tons
      • Push capacity: 11.2 tons

      SX600YC-II
      • Pressing capacity: 600 tons
      • Mold opening capacity: 150 tons
      • Turning capacity: 35 tons
      • Push capacity: 21.5 tons

      Installation size
      High Precision Mold Detection Machine Clamping Two Plates

      High Precision Mold Checking Machine with Double-Plate Clamp

      Technical parameters
      Model series   SX160YC-Ⅱ SX300YC-Ⅱ SX400YC-Ⅱ SX600YC-Ⅱ
      Pressing capacity T 160 300 400 600
      Lifting capacity of upper machine table T 38 56 80 150
      Overturning capacity of upper machine table T 8 18 25 35
      Push capacity T 6.3 6.3 11.2 21.5
      Minimum die thickness mm 300 600 600 800
      Maximum die thickness mm 1000 1600 2000 2800
      Maximum distance between two machine tables mm 1700 2300 2700 3500
      Overturning angle of the upper table ° 180 180 180 180
      Table size mm 1600×1300 2000×1800 3000×2000 4000×2800
      Table load T 16 36 50 70
      Travel of the lower table mm 3200 2750 4800 6800
      Exhaust stroke mm 300 300 350
      Motor power kW 18.5 30 45 55
      Minimum mold size (Length×Width) mm 460×690 600×750 810×780 2100×1015
      Outside dimensions (length×width×height) mm 6500×2790×4370 6010×5145×5850 8300×4480×6460 11250×5590×8500
      Overall dimensions (When not in use) mm 6500×2790×3610 6010×5145×4550 8300×4480×5130 8300×4480×5130
      Weight T 22 45 80 125

      Note: Specifications are subject to change without notice.

      Features
      • Designed with a sturdy guide column structure, which allows for higher precision during high-pressure molding and convenient adjustment of the parallelism of the roller.
      • All moving parts are equipped with graphite bronze guide sleeves for oil-free and self-lubricating operation, making the equipment clean and environmentally friendly.
      • Equipped with fault detection function, alarm system and low-pressure mold protection function, practical and reliable to improve work safety and efficiency.
      • Equipped with high-precision positioning and lifting devices on the lower table, improving operating efficiency.
      • There are four mold clamping cylinders, which distribute the force evenly during high-pressure molding and minimize the deformation coefficient.
      • Using German-made SIKO magnetic strip to accurately detect the position of the moving roller, ensuring accurate results.
      • The machine height is reduced by 15-25% compared to the JM series, solving the problem of factories with limited height, helping to increase the ability to utilize space optimally.

      Optional equipment
      Servo motor system

      Using the included optional servo motor for control can help reduce the oil temperature and energy consumption of the mold detector.

      Magnetic plate mold

      Magnetic plate molds are used in connection with the mold detection machine to achieve fast and accurate mold changes.

      Hydraulic clamping system

      We provide a variety of hydraulic clamping systems that match the mold detection machine, allowing customers to change molds quickly and accurately.

      Reviews

      There are no reviews yet.

      Be the first to review “High Precision Spotting Press with Two Plate Clamping”

      0903-42-9994