sp3

FW-S Series Hydraulic Clamping System

    Contact

    The FW-S series hydraulic clamping system is used in clamping the mold with the clamping direction up and down. The clamping system is equipped with an automatic moving cylinder and can automatically clamp the mold by manual pulling, thus achieving optimal operation
    performance and ensuring more safety.

    The FW-S hydraulic clamping system is widely used for various mold processing equipment, including plastic injection molds, stamping molds, die casting molds, glass molds, rubber molds, metallurgical molds, etc., and is a necessary equipment in the production of injection molds and die casting molds.

      Technical parameters
      FW2-S
      • Clamp force (25MP): 20 kn
      • Maximum clamping stroke: 150 mm
      • Chamber air pressure: 0.4-0.55 mp
      • Clamp moving speed: 30-80 mm/s (adjustable)

      FW4-S
      • Clamping force (25MP): 40 kn
      • Maximum clamping stroke: 150 mm
      • Chamber air pressure: 0.4-0.55 mp
      • Clamp moving speed: 30-80 mm/s (adjustable)

      FW6-S
      • Clamping force (25MP): 60 kn
      • Maximum clamping stroke: 200 mm
      • Air pressure chamber: 0.4-0.55 mp
      • Clamp moving speed: 30-80 mm/s (adjustable)

      FW10-S
      • Clamp force (25MP): 100 kn
      • Maximum clamping stroke: 300 mm
      • Chamber air pressure: 0.4-0.55 mp
      • Clamp moving speed: 30-80 mm/s (adjustable)

      FW25-S
      • Clamping force (25MP): 250 kn
      • Maximum clamping stroke: 300 mm
      • Chamber air pressure: 0.4-0.55 mp
      • Clamp moving speed: 30-80 mm/s (adjustable)

      FW50-S
      • Clamping force (25MP): 500 kn
      • Maximum clamping stroke: 300 mm
      • Chamber air pressure: 0.4-0.55 mp
      • Clamp moving speed: 30-80 mm/s (adjustable)

      Line specifications

      Line Clamp force(25MP) Minimum clamping cycle Chamber air pressure Clamp moving speed Weight
      KN mm MP mm/s kg
      FW2-S 20 150 4 30-80 Adjustable 2
      FW4-S 40 150 4 4.8
      FW6-S 60 200 4 7.2
      FW10-S 100 300 5 13
      FW16-S 160 300 5 23
      FW25-S 250 300 5 36
      FW50-S 500 300 5 80

      Product selection
      You can choose the type and number of clamps according to the needs of your device.

      Machine capacity Technical parameters of hydraulic clamping system Thickness of mold plate(mm)
      Fixed roller Quantity Moving roller Quantity
      650-850 FW16-S 4 FW16-S 4 50
      900-1300 FW16-S 6 FW16-S 6 50
      1400-1600 FW25-S 6 FW25-S 6 50
      1800-2800 FW25-S 8 FW25-S 8 60
      3300-4000 FW50-S 8 FW50-S 8 60
      Size
      Mold Checking Machine, High Precision YC Series

      Mold Checking Machine, High Precision YC Series

      Technical parameters G R J E F M N Rc T P Q K L H(Standard)
      FW2 60 65 58 46.5 39.5 18 1/4 48 M5X35 1/8 15 18 108.5 25
      FW4 66 72 80 54 47 18 1/4 70 M5X35 1/8 15 23 108.5 30
      FW6 80 92 85 66 58 24 1/4 76 M8X45 1/8 21 30 119 30
      FW10 90 110 109 75 66 32 1/4 95 M10X55 1/8 26 30 137 40
      FW16 100 119 125 84 75 32 1/4 120 M10X55 1/8 26 30 137 50
      FW25 113 150 150 97.5 95.5 41 1/4 135 M12X70 1/4 32 30 163 50
      FW50 155 200 200 140 135 110 1/4 160 M16X85 1/4 38 30 172 60

      Note: H is the thickness of the mold base plate matched with the standard hydraulic clamp and can be customized upon request.

      Features
      • Advanced electrical system control with OMRON programmable controller, ensuring precise control and easy-to-use operating interface.
      • Multiple safety protections, ensuring operator safety and preventing any potential hazards during clamping.

      Reviews

      There are no reviews yet.

      Be the first to review “FW-S Series Hydraulic Clamping System”

      0903-42-9994