According to the capacity levels, we provide 8 different types of machines from 68T to 500T. The floor area of the entire equipment is from 4.42m2 – 31.32m2, so it is necessary to consider the layout of your factory to choose the right equipment.
68T-200T Mold Detection Machine
| Machine model | SX1008-68C | SX1411-100C | SX1613-160C | SX1815-200C | |
| Pressing capacity | T | 68 | 100 | 160 | 200 |
| Lifting capacity | T | 18 | 28 | 40 | 50 |
| Tipping capacity | T | 2.5 | 4 | 8 | 10 |
| Push capacity | T | 2.2 | 2.2 | 6.3 | 6.3 |
| Size table size | T | 1000×800 | 1400×1100 | 1600×1300 | 1800×1500 |
| Opening stroke of upper table | mm | 1000 | 1300 | 1600 | 1800 |
| Travel stroke of lower table | mm | 1840 | 2500 | 2940 | 2940 |
| Discharge stroke | mm | 65 | 65 | 250 | 250 |
| Overturning angle of upper table | ° | 180 | 180 | 180 | |
| Maximum mold weight | T | 4 | 8 | 16 | 20 |
| Outside dimensions (length×width×height) | mm | 2600×1700×3900 | 4300×2350×5100 | 4950×2850×5800 | 5800×3000×6100 |
| Weight | T | 8 | 18 | 25 | 30 |
Mold Demolition Machine 300T-500T
| Model | SX2017-300C | SX2618-360C | SX3020-400C | SX3121-500C | |
| Pressing capacity | T | 300 | 360 | 400 | 500 |
| Lifting capacity | T | 65 | 90 | 120 | 120 |
| Tipping capacity | T | 12.5 | 16 | 25 | 30 |
| Push capacity | T | 6.3 | 11.2 | 16 | 16 |
| Table size | T | 2000×1700 | 2600×1800 | 3000×2000 | 3100×2100 |
| Opening travel of the upper table | mm | 2060 | 2500 | 2500 | 2800 |
| Travel stroke of lower table | mm | 3330 | 3530 | 3890 | 4800 |
| Discharge stroke | mm | 250 | 280 | 300 | 300 |
| Overturning angle of upper table | ° | 180 | 180 | 180 | 180 |
| Maximum mold weight | T | 25 | 32 | 50 | 60 |
| Outside dimensions (length×width×height) | mm | 6500×3500×7300 | 6650×4070×7950 | 7050×4200×8300 | 7200×4350×8700 |
| Weight | T | 48 | 68 | 80 | 100 |
Note: Specifications are subject to change without prior notice.
This gantry mold detector is a basic model, but the design of each detail still reflects our high requirements for mold detectors.
- The whole machine is controlled by a dedicated computer and uses a large-size display screen. large size to complete the operation.
- It uses MTS digital reader to check the displacement distance of the movable mold base to make the positioning more accurate.
- It has the function of automatic fault detection and alarm. It has the function of protecting the mold under low pressure conditions.
- The edges of the plate mold, the lower base and the center base are all connected together, but in the traditional mold scanning process, the entire surface is in direct contact with each other. In this way, the accuracy of mold detection is increased.
The device can be controlled by an optional accompanying motor to help reduce the oil temperature and energy consumption of the mold detector.
Magnetic plate mold can be used in conjunction with all mold detection machines to support customers’ fast and stable mold change.
We can provide a hydraulic clamping system that matches the mold detection machine, helping customers change molds quickly and accurately.
Reviews
There are no reviews yet.